| To: | |
|---|---|
| Subject: | Re: [ts-7000] Re: Serial port i/o voltage |
| From: | Jeff Cunningham <> |
| Date: | Tue, 17 Jul 2007 07:07:27 -0700 |
Hi Angel,
I've been having some issues with COM2 on a TS-7200 board. Does this
also apply to the TS-7200?
Jeff
Angel Rodriguez wrote:
>
> Hello BillBergeron,
>
>
> I think by default both coms are configured as console ports. Comment
> out in /etc/inittab the line
>
>
> lgn1:12345:respawn: /sbin/getty -L 115200 ttyAM1
>
>
> then com2 will come up a a normal serial port
>
>
> Angel
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Re: Serial port i/o voltage, Angel Rodriguez |
|---|---|
| Next by Date: | Re: [ts-7000] mounting the flash filesystem, Michael Schmidt |
| Previous by Thread: | Re: [ts-7000] Re: Serial port i/o voltage, Angel Rodriguez |
| Next by Thread: | Re: [ts-7000] Re: Serial port i/o voltage, Jim Jackson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU