I don't know why it sees 4 partitions, anyway I tried with them all
with no success.
I did try also with 2 other more recent usb memory stick, one of 1GB
and the other one of 2GB, when mounting they gave me the same error I
have when no stick is attached to the board.
Plugging a memory stick is getting much harder than expected!
Marco
--- In wrote:
>
>
> >USB Mass Storage device found at 3
> >SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
> >sda: Write Protect is off
> > /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
> > I/O error: dev 08:01, sector 0
> >FAT: unable to read boot sector
>
> Apparently there are 4 partitions on your stick. Have you considered
> the possibility that your file system is not in partion 1?
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|