Kevin,
before posting I searched the group, but I didn't find anything
working for me, that's why I put the message.
I have to correct what I previously wrote, I mean after startup the
board has no "/dev/scsi/...", just "/dev/" with other dirs in it.
Then, after I execute "/usr/bin/loadUSBModules.sh", in the "/dev"
folder appear also "/dev/discs", "/dev/scsi/host0/..."
and "/dev/usb". At this time I try to "mount -t
vfat /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/usb/" and I get the
error "Invalid argument".
My usb stick memory has 128MB and has windows-generated files in it,
so it comes with a FAT filesystem. I tried to use a different
memories, always FAT, but 1Gb and 2GB now and I had the "No such
device or address" error. This failure is the same as with no stick
attached.
I don't know what to try, suggestions are really welcome.
Thanks,
Marco
--- In Kevin Cozens <> wrote:
>
> marcolamonato wrote:
> > I searched how to mount a USB memory stick, formatted with the
> > Windows FAT filesystem, on a TS-7250, but I've not been able to
have
> > this one working so far.
>
> Check the archives of this mailing list. This was discussed here
quite recently.
>
> --
> Cheers!
>
> Kevin.
>
> http://www.ve3syb.ca/ |"What are we going to do today,
Borg?"
> Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
> | Try to assimilate the world!"
> #include <disclaimer/favourite> | -Pinkutus & the Borg
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|