Hi Rich,
It would be posible to have passthrough connectors and mount the PC/
104 stack under the CPU...
One thing I'd like to see would be an 8-bit PC/104 bus connector
mounted as shown in the PDFs, and the 16-bit expansion header mounted
upside down (on the bottom of the board). In that way you could use 8-
bit PC/104 cards above the CPU and custom FPGA driven I/O (Video!) on
a card mounted below.
====PC/104 CARDS======
++
||
======================
||
++
====FPGA EXPANSION====
Regards,
PJE
--- In "Rich Wilson" <> wrote:
>
> On 7/2/07, Ronald Gomes <> wrote:
>
> > http://www.embeddedarm.com/temp/ts-7800-datasheet.pdf
> > http://www.embeddedarm.com/temp/ts-new-products.pdf
> >
> >
> Are SATA and PC-104 mutually exclusive?
> It looks like an installed PC-104 board would interfere with
connecting
> SATA cables, unless you have low-profile right-angle cables.
>
> Rich
>
> --
> Rich Wilson
>
> 425-337-7129
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|