ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [ts-7000] New TS-7800 500MHZ ARM9 SBC

from [Ronald Gomes] [Permanent Link][Original]
To:
Subject: Re: [ts-7000] New TS-7800 500MHZ ARM9 SBC
From: Ronald Gomes <>
Date: Mon, 2 Jul 2007 18:36:07 -0300 (ART)
Hi,

Yes, two vertical SATA connectors are in the middle of the board. Power for the hard drives should be supplied externally.
The TS-7800 can be powered using 5V supply or an optional 8-30V switching regulator.

Ronald.

Sean Hopkins <> escreveu:
Awesome.  I assume that in the middle of the device is where the dual SATA connectors are.  What kind of power supply is available for this ?  Will it be able to power 1 or 2 SATA HDD's ?  So far I have run into problems with the current PS not providing enough power to start up the HDD's attached to a TS7260.

I can guess that I will be getting a few of these....

Sean

Novo Yahoo! Cadê? - Experimente uma nova busca. __._,_.___


SPONSORED LINKS
Single board computer Hardware Computer running slow
Linux os Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [ts-7000] Re: New TS-7800 500MHZ ARM9 SBC, PeterElliot
Next by Date:  Re: [ts-7000] TS-PLC?, michael
Previous by Thread:  Re: [ts-7000] New TS-7800 500MHZ ARM9 SBC, Sean Hopkins
Next by Thread:  Re: [ts-7000] New TS-7800 500MHZ ARM9 SBC, Joel Winarske
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU