Hi Ronald,
Very interedting... I think I'll have to get one to play with...
How much of the FPGA is left for the user once the system functions
are implemented? It would be nice to be able to program the FPGA
without loosing too much basic functionality of the board.
Looking at the position of the microSD card slot I assume this is for
embeddded data!
Does the 24V Option have any way of integrating a BAT3 type save
powerdown?
How would you add a SVGA (800x600) LCD display to this card? If I
could then I might be able to swap over to this board fairly easily.
Regards,
PJE
--- In Ronald Gomes <>
wrote:
>
> Hello everybody,
>
> Just to let you know about the new designs we have been working on
during the last months here in the TS office.
> Please, find some preliminary announcements at:
>
> http://www.embeddedarm.com/temp/ts-7800-datasheet.pdf
> http://www.embeddedarm.com/temp/ts-new-products.pdf
>
> The TS-7800 highlights are the 500MHz ARM9, internal PCI bus,
Gigabit Ethernet, USB High-Speed, dual SATA and SD, 12K LUT FPGA and
the fact it is backward compatible with our TS-72xx computers ? same
footprint. Also, it runs Kernel2.6 and Debian by default from the
512MB on-board flash. We believe the TS-7800 is going to be a good
and easy platform upgrade option for those demanding more
performance ? the TS-7800 is about 3 times faster compared to the TS-
72xx.
>
> We should be officially releasing the TS-7800, TS-POE100 and the
TS-PLC in the next one/two months.
>
> Any comments/suggestions before we do a final release are
appreciated.
>
> Regards,
> Ronald.
>
>
>
> ---------------------------------
> Novo Yahoo! Cadê? - Experimente uma nova busca.
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|