Hello,
> Only one partition. fdisk only recogized 1 gig. I bought an SD with
> pre-installed OS on it from TS (invoice #34396, in case someone needs
> to look it up and see if there was an error). Perhaps they sent an
> older version of Linux without the correct driver installed. I put a
> 2G in the second slot, made two partitions from the available space
> and mounted them.
Could you provide some information showing the problem of only 1GB being
recognized. Could you format the card with a single 2GB partition. Then
reboot, then mount the card. Could you then provide the output of dmesg
and df.
--
Best Regards,
______________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
> --- In Eddie Dawydiuk <> wrote:
>>
>> Hello,
>>
>>> I have a 7300 purchased March 7th. I have a 2G SD in it but only 1 is
>>> recognized. Could there be an error in my shipment or is this
>>> information wrong?
>>
>> You may want to check the partition table to ensure there aren't
>> multiple partitions... What does fdisk say? How are you mounting the
>> card? How are you determining you have only 1GB?
>>
>> --
>> Best Regards,
>> ______________________________________________________________
>> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
>> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
>> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>
>>
>>> --- In Eddie Dawydiuk <eddie@> wrote:
>>>>
>>>> Hello,
>>>>
>>>>> I have not had a chance to really explore it, but when I boot to
>>> the SD card
>>>>> with the new driver, fsck runs saying that it has been quite
>>> awhile since
>>>>> the partition was checked last. I haven't got a board handy to
>>> look at right
>>>>> now, so I can't give you the exact details. I was going to look at
>>> one of
>>>>> the original sd cards to see if it did the same thing as well, but
>>> I haven't
>>>>> had a chance. What I did notice though was that if I did a
>>>>>
>>>>> tune2fs -l
>>>>>
>>>>> the Last checked date was sometime in 1969.
>>>>
>>>> If you don't have an RTC installed I would expect to see this
> behavior.
>>>> If this is the case you can use tune2fs to disable the periodic
>>>> filesystem check on the card.
>>>>
>>>> --
>>>> Best Regards,
>>>> ______________________________________________________________
>>>> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
>>>> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
>>>> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>>>
>>>>> On 4/30/07, Eddie Dawydiuk <eddie@> wrote:
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>>> We are purchasing 7 TS-7300's. There previously was an issue
>>> about the
>>>>>>> driver for the SD cards not being able to format greater than a
>>> 1GIG CF
>>>>>>> card. I understand it's been corrected.
>>>>>>
>>>>>> Yes, since 02/01/2007 the new SD driver that supports up to 4GB
>>> SD cards
>>>>>> has been shipping.
>>>>>>
>>>>>> ftp://oz.embeddedarm.com/images/debian/Changelog-Sarge
>>>>>>
>>>>>>> Will the new units ship with the corrected driver?
>>>>>>
>>>>>> Yes.
>>>>>>
>>>>>> --
>>>>>> Best Regards,
>>>>>> __________________________________________________________
>>>>>> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
>>>>>> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
>>>>>> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|