[ts-7000] DIO pins on TS7260 are high on boot, can they be set low on bo

ts-7000

[ts-7000] DIO pins on TS7260 are high on boot, can they be set low on bo

To:
Subject:	[ts-7000] DIO pins on TS7260 are high on boot, can they be set low on boot?
From:	"buthungwon" <>
Date:	Thu, 03 May 2007 15:17:00 -0000

Hi,

I have an application that needs the DIO pins to be low when the sbc 
boots up. Is there a way to do this without using external hardware?

Thanks,
Will



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] DIO pins on TS7260 are high on boot, can they be set low on boot?, buthungwon <=

Previous by Date:	Re: [ts-7000] TSLinux `shutdown` source, Michael Schmidt
Next by Date:	Re: [ts-7000] Re: To Eddie regarding new TS-7300's, Eddie Dawydiuk
Previous by Thread:	[ts-7000] I2S on 7260?, pgb_psu
Next by Thread:	[ts-7000] gcc-4.0.x TR1 bug(s), Frank Pagliughi
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU