Hello,
> Device Boot Start End Blocks Id
> System
> /dev/sdcard1/disc0/part1 1 5 1264 83
> Linux
> /dev/sdcard1/disc0/part2 6 10 1280 83
> Linux
> /dev/sdcard1/disc0/part3 20 3810 970496 83
> Linux
>
> Then i execute the following command:
>
> mkfs.ext2 /dev/sdcard1/disc0/part3
> or tried
> mkfs.ext3 /dev/sdcard1/disc0/part3
> neither of them worked later
After you make changes to the partition table using fdisk try rebooting,
then running mkfs. The ioctl to reread the partition table is not
implemented in the SD driver.
//Eddie
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|