I fixed this problem. Somehow, I accidentally reset the RedBoot bootup delay
to a
ridiculously small number, like 10 ms or something like that. After many
tries, I hit the
CONTROL-C within the 10 ms window and immediate changed the bootup delay back
to 1
second.
--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > I just started having a problem where I can't interrupt the boot process at
> > RedBoot
anymore.
> > I've been pressing CONTROL-C at just the right time, but it continues
> > booting from
flash.
> > Until today, I was able to CONTROL-C into the RedBoot prompt just fine.
> > Any ideas?
>
> Ensure your terminal emulator has hardware/software flow control disabled. If
> you
> have verified this then try using another terminal emulator other than
> hyperterminal, teraterm is a free open source emulator for windows I would
> suggest.
>
> Although you didn't mention what terminal emulator you are using
> these are the two issues that cause the problem you described...
>
> //Eddie
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|