Hello,
> I just started having a problem where I can't interrupt the boot process at
> RedBoot anymore.
> I've been pressing CONTROL-C at just the right time, but it continues booting
> from flash.
> Until today, I was able to CONTROL-C into the RedBoot prompt just fine. Any
> ideas?
Ensure your terminal emulator has hardware/software flow control disabled. If
you
have verified this then try using another terminal emulator other than
hyperterminal, teraterm is a free open source emulator for windows I would
suggest.
Although you didn't mention what terminal emulator you are using
these are the two issues that cause the problem you described...
//Eddie
------------------------ Yahoo! Groups Sponsor --------------------~-->
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/4It09A/fOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|