Hello,
> I fixed this problem. Somehow, I accidentally reset the RedBoot bootup delay
> to a
> ridiculously small number, like 10 ms or something like that. After many
> tries, I hit the
> CONTROL-C within the 10 ms window and immediate changed the bootup delay back
> to 1
> second.
You may want to refer to this post as having a delay of .1 s is the
default setting.
http://tech.groups.yahoo.com/group/ts-7000/message/4887
//Eddie
>
> --- In Eddie Dawydiuk <> wrote:
>>
>> Hello,
>>
>>> I just started having a problem where I can't interrupt the boot process at
>>> RedBoot
> anymore.
>>> I've been pressing CONTROL-C at just the right time, but it continues
>>> booting from
> flash.
>>> Until today, I was able to CONTROL-C into the RedBoot prompt just fine.
>>> Any ideas?
>>
>> Ensure your terminal emulator has hardware/software flow control disabled.
>> If you
>> have verified this then try using another terminal emulator other than
>> hyperterminal, teraterm is a free open source emulator for windows I would
>> suggest.
>>
>> Although you didn't mention what terminal emulator you are using
>> these are the two issues that cause the problem you described...
>>
>> //Eddie
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Great things are happening at Yahoo! Groups. See the new email design.
http://us.click.yahoo.com/lOt0.A/hOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|