Hello,
> I wanna use com 1,2&3 to work as a console ports and com 4,5,6 to
> control modems but in the TS manual com 3,4,5,6 ports are used
> exclusively for the FPGA. Another question.. what are the names of the
> devices for com 3,4,5,6 since for com 1,2,3 are ttyAM0, ttyAM1 and
> ttyAM2 located in the /dev directory ?
In the "Linux for ARM on TS-7000 User's Guide" you can find
documentation on this. On page 30 you will find COM1 and COM2 correspond
to ttyAM0, and ttyAM1. The remaining dev entries for the TS-7300 are
documented on page 31... Just to clarify COM1 and COM2 are implemented
in the EP9302, the remaining COM ports are implemented in the FPGA. All
of the COM ports are available...
//Eddie
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|