>
> Hi,
>
> I'm currently using one of the TS-7300's additional COM ports to talk
> to a serial touch screen controller, and another (used as two
> separate RS232 ports) to talk to a DeviceNet interface card. This
> still leaves four serial ports for future uses...
>
> What are you wanting to use them for?
>
> PJE
>
Hi,
I wanna use com 1,2&3 to work as a console ports and com 4,5,6 to
control modems but in the TS manual com 3,4,5,6 ports are used
exclusively for the FPGA. Another question.. what are the names of the
devices for com 3,4,5,6 since for com 1,2,3 are ttyAM0, ttyAM1 and
ttyAM2 located in the /dev directory ?
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|