Hi,
There may be an issue with using the FPGA ports with modems. The
ports implement either two two wire (TX/RX) ports or a single (TX/RX/
CTS/RTS) port. However, these ports don't have any of the modem
control signals you may need.
PJE
--- In "Elizabeth" <> wrote:
>
> I wanna use com 1,2&3 to work as a console ports and com 4,5,6 to
> control modems but in the TS manual com 3,4,5,6 ports are used
> exclusively for the FPGA. Another question.. what are the names of
the
> devices for com 3,4,5,6 since for com 1,2,3 are ttyAM0, ttyAM1 and
> ttyAM2 located in the /dev directory ?
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|