[ts-7000] comm 3 - 4

["davidalgeo" <>]

Hello all, I have a question about Comm3 TS7260 board with the 2TTLCOM
option. The manual say you can query Comm3 to determine if it is RS232
or TTL with the command:
cat /proc/device/tsuart/com3ttl  however /proc/device is not present
in the proc directory.   How do you query/set the port?

The devices are present in the /dev directory and tsuart.o is loaded.

Thanks david

 



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/