THNX EDDIE!!
That was exactly the problem we had with Yulliel. But I have one more
question. Why is it that the cylinders starts on 20, what happens
with cylinders 11 to 19??
Thank you once more.
--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > I have a problem when installing fastboot in a new 1G SD card in a
> > TS7300, i follow all the steps:
> > $ dd if=fastboot-7300-sdcard-7-6-2006.dd of=/dev/sdcard1/disc0/disc
> > $ fdisk /dev/sdcard1/disc0/disc
> > I get this:
> >
> > Device Boot Start End Blocks Id
> > System
> > /dev/sdcard1/disc0/part1 1 6 1520 da
> > Non-FS data
> > /dev/sdcard1/disc0/part2 7 10 1024 da
> > Non-FS data
> > /dev/sdcard1/disc0/part3 11 3810 972800 83
> > Linux
>
> It looks like you didn't keep the start of the third partition on the
> same cylinder. I believe it starts on cylinder 20 by default...
>
> //Eddie
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|