ts-7000
[Top] [All Lists]

[ts-7000] problems installing fastboot

To:
Subject: [ts-7000] problems installing fastboot
From: "Elizabeth" <>
Date: Wed, 03 Jan 2007 17:03:14 -0000
Hello everyone..
I have a problem when installing fastboot in a new 1G SD card in a TS7300, i follow all the steps:
$ dd if=fastboot-7300-sdcard-7-6-2006.dd of=/dev/sdcard1/disc0/disc
$ fdisk /dev/sdcard1/disc0/disc

I get this:

                  Device Boot      Start         End      Blocks   Id  System
/dev/sdcard1/disc0/part1               1           6        1520   da  Non-FS data
/dev/sdcard1/disc0/part2               7          10      &! nbsp; 1024   da  Non-FS data
/dev/sdcard1/disc0/part3              11        3810      972800   83  Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 22: Invalid argument.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.


Then I execute the following commands and get:

$ ext2resize /dev/sdcard1/disc0/part3
ext2resize v1.1.18 - 2001/03/18 for EXT2FS 0.5b
ext2resize: ext2_open: invalid superblock
ext2resize: can't open /dev/sdcard1/disc0/part3


I also used: 

e2fsck -f /dev/sdcard1/disc0/part3
e2fsck 1.37 (21-Mar-2005)
Couldn't find ext2 superblock, trying backup! blocks...
e2fsck: Bad magic number in super-block while tr! ying to open /dev/sdcard1/disc0/part3

The superblock could not be read or does not describe a correct ext2
filesystem.  If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>

resize2fs /dev/sdcard1/disc0/part3
resize2fs 1.37 (21-Mar-2005)
resize2fs: Bad magic number in super-block while trying to open /dev/sdcard1/disc0/part3
Couldn't find valid filesystem superblock.



I don't know what to do.. what is the magic number?  If someone could help me would be great... thanks!!

Elizabeth Vaca __._,_.___


SPONSORED LINKS
Single board computer Hardware Computer running slow
Linux os Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU