The problem that originally led to installing the kernel and initrd downloaded
from the group files area was lack of access to the SD card on boot up.
Unfortunately redboot was damaged in the process or fconfig seem to have been
damaged.
Subsequently I've been trying to get the boot.bin and other parts of
serialblaster to compile. I have serialblaster compiled and talking to the
TS-7260 but the boot.bin will not compile. There was a compiled Redboot with
that package but not a compiled boot.bin and the files in the package do not
seem to match up completely with the README.
I'm new to the TS-7260, the cross-compiler and ecos software. Suggestions
would be welcome.
On Sunday 12 November 2006 21:24, Petr Stetiar wrote:
> > I loaded the zImage and initrd.gz into memory using tftp and booted
> > successfully. It was then loaded into flash, see below.
>
> I would try to reflash RedBoot and proper ts-bootrom rather then kernel.
>
> -- ynezz
--
Regards,
Kevin R. Battersby <>
Sea Star Solutions Ltd.
250-514-2063 Direct
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|