We have 2 TS-7300 but I've problems to get them to boot. I would be
very pleased if somebody can give some help with it.
The board has been connected to 5V and the com1 port shows a TS-SDboot
message on minicom. There is a SD card of 256 mb inserted in socket 1.
I installed on the sd card fastboot-7300-7-6-2006.dd (with dd).
when I run fdisk I see 3 partitions:
/dev/sdc1p1 ....non fs data
/dev/sdc1p2 .... non fs data
/dev/sdc1p3 linux filesystem
Nothing but this single ts-SDboot line is showing. It's the right sd
socket, but I tried also the other one with no change. The leds don't
show any error and board just reboots after a short period with the
same result.
John
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|