Another Question Michael.....
On Thu, 9 Nov 2006, Michael Schmidt wrote:
> cpu_speed_max
> set the CPU and bus speed to their maximum (normal) values,
> e.g. 200Mhz/100Mhz.
>
> cpu_speed_166
> set the CPU speed to 166Mhz and the bus speed to 66Mhz.
>
> cpu_speed_42
> set the CPU speed and bus speed to 41.5Mhz. This is the slowest speed
> that Ethernet will work at.
>
> cpu_speed_min
> set the CPU and bus speed to their minimum values (14.7456Mhz)
>
With the CPU speed changes do you change the SDRAM refresh register?
Jesse pointed out earlier this year that I'd omitted that in my cctl
program.
cheers
Jim
----------------------------------------------------------------------------
HomePage: http://www.comp.leeds.ac.uk/jj
TS7200 Page: http://www.comp.leeds.ac.uk/jj/linux/arm-sbc.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|