>
> Another Question Michael.....
>
> On Thu, 9 Nov 2006, Michael Schmidt wrote:
>
>> cpu_speed_max
>> set the CPU and bus speed to their maximum (normal) values,
>> e.g. 200Mhz/100Mhz.
>>
>> cpu_speed_166
>> set the CPU speed to 166Mhz and the bus speed to 66Mhz.
>>
>> cpu_speed_42
>> set the CPU speed and bus speed to 41.5Mhz. This is the slowest speed
>> that Ethernet will work at.
>>
>> cpu_speed_min
>> set the CPU and bus speed to their minimum values (14.7456Mhz)
>>
>
> With the CPU speed changes do you change the SDRAM refresh register?
Yes.
> Jesse pointed out earlier this year that I'd omitted that in my cctl
> program.
>
> cheers
> Jim
Regards,
Michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|