To: | |
---|---|
Subject: | Re: [ts-7000] TS-7260 Bricked After Boot to SD Card Modification Atempted |
From: | "Kevin R. Battersby" <> |
Date: | Fri, 10 Nov 2006 13:29:11 -0800 |
Thanks. I'm just looking at the software now. On Friday 10 November 2006 05:02, Petr Stetiar wrote: > Yes, unit can be forced to load small 2kB image via serial port and > software which can do this is called Serial Blaster [1]. You can use it for > example to boot into RedBoot on flash image or to download RedBoot image > via serial and then run it. -- Regards, Kevin R. Battersby <> Sea Star Solutions Ltd. 250-514-2063 Direct Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [ts-7000] question about pc/104 interface, Eddie Dawydiuk |
---|---|
Next by Date: | [ts-7000] ADC driver for the TS-7250 card, gertjan_hofman |
Previous by Thread: | Re: [ts-7000] TS-7260 Bricked After Boot to SD Card Modification Atempted, Petr Stetiar |
Next by Thread: | Re: [ts-7000] TS-7260 Bricked After Boot to SD Card Modification Atempted, Kevin R. Battersby |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU