Re: [ts-7000] TS-7260 Bricked After Boot to SD Card Modification Atempted

[Jason Stahls <>]

http://www.embeddedarm.com/linux/ARM.htm#appdev

Jason

Kevin R. Battersby wrote:

Thanks for the link Petr.

I've successfully compiled the utility but not the boot.bin. This seems to 
require a cross compiler which I'm not familiar with.

Any hints on where to find the needed tools?

On Friday 10 November 2006 05:02, Petr Stetiar wrote:
  

Yes, unit can be forced to load small 2kB image via serial port and
software which can do this is called Serial Blaster [1]. You can use it for
example to boot into RedBoot on flash image or to download RedBoot image
via serial and then run it.

[1] http://ynezz.ibawizard.net/ts7250/serial_blaster_1.0.tar.bz2
    

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___