In a post I just made (pending approval by moderator, since it is my
first post), I have detailed, easy to follow instructions for building
a kernel for the 7260, and links to the technologics documentation
that backs it up. See
http://vexrobot.blogspot.com/2006/11/cross-compiling-quickcam-web-cam.html
Just omit the steps that deal with configuring with make menuconfig if
you are not looking for web cam support.
syd
--- In Jason Stahls <> wrote:
>
> http://www.embeddedarm.com/linux/ARM.htm#appdev
>
> Jason
>
> Kevin R. Battersby wrote:
>
> >Thanks for the link Petr.
> >
> >I've successfully compiled the utility but not the boot.bin. This
seems to
> >require a cross compiler which I'm not familiar with.
> >
> >Any hints on where to find the needed tools?
> >
> >On Friday 10 November 2006 05:02, Petr Stetiar wrote:
> >
> >
> >>Yes, unit can be forced to load small 2kB image via serial port and
> >>software which can do this is called Serial Blaster [1]. You can
use it for
> >>example to boot into RedBoot on flash image or to download RedBoot
image
> >>via serial and then run it.
> >>
> >>[1] http://ynezz.ibawizard.net/ts7250/serial_blaster_1.0.tar.bz2
> >>
> >>
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|