Joe,
Thanks for your answer. I'm using the version from
ftp://oz.embeddedarm.com/wireless/zd1211/r83 in its default mode
(which seems to be B, since it says 11MB). I don't have control over
the access point. Any other thoughts?
Brian
--- In Joe Bouchard <> wrote:
>
>
> On Tue, Oct 31, 2006 at 05:48:46PM -0000, gunghoiguana wrote:
> > Hi,
> >
> > I'm a newbie to the ts-7260, and I'm having reliability issues with
> > the USB 802.11 and zd module. It comes up fine and works for a little
> > while, but after a few minutes my connectivity mysteriously goes away.
> > Bringing the interface down and back up doesn't help, but unloading
> > and reloading the zd module brings the connection back (at least,
> > until it disappears again). This makes me suspicious of zd.
>
> If you don't know for sure what version you have, then I suggest you
start by
> grabbing a new version of the zd module. I had similar problems and
Eddie
> emailed me a new module, but I think it's probably easiest to go to
> ftp://oz.embeddedarm.com/wireless/zd1211/r83 and grab zd.o from
there. If that
> doesn't work, post back.
>
> If you are trying for 802.11"G" instead of "B", that's probably not
going to
> work well, I've tried forcing it, and it's flakey at best. The
USB1.1 connection between
> the CPU and the adapter is much less than 54Mb/s, so it can't keep
up. Setting
> your access point to mixed mode or "B only" should default the
adapter to B.
>
> Good luck,
> Joe
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|