For me, the value in zigbee/802.15.4 is that it does the encryption,
routing, etc. For me, a bare radio would be a lot of extra work.
Correct me if I am wrong, but it seems that the Maxstream product has
a radio, serial interface, various on-board I/O, and the zigbee part
baked in, all in about 1x1 inch part. They could be stand alone parts
with no extra processor attached, only configure once through the
serial port setting encryption, node id, data direction, or could be
mounted on a board and interfaced to a processor via the serial port,
allowing you to, for instance, write to registers that would be
readable by other nodes. Thus, you could use the Maxtream product to
export the analog values and discrete values from the TS-7400. Of
course there would also be the ability for other nodes to write to
registers in the Maxstream part, and you could then read them
periodically and send them as outputs.
Well, I am still working on figuring it all out.
Don.
On 10/31/06, Chuck Younger <> wrote:
>
>
>
>
>
>
>
>
>
> I think you are correct. The part we are considering is a preassembled board
> with the radio, antenna, and a mpu. The mpu contains the 802.15.4 protocol
> and some capability to add some functionality. It also has connectors to
> enable it to be plugged into a host board for interfacing.
>
>
>
> The radio chips are available separately without the protocol (raw data
> output).
>
>
>
>
>
>
> Charles T. Younger
> Sr Software Engineer
> Design Concepts, Inc
> direct ph. (608)663-1565
> fax. (608)221-2133
> www.design-concepts.com
>
> ________________________________
>
> From: On Behalf Of
> Yan Seiner
> Sent: Tuesday, October 31, 2006 2:29 PM
> To:
> Subject: [ts-7000] Re: IEEE 802.15.4/zigbee
>
>
>
>
>
>
> --- In "William C. Landolina" <> wrote:
> >
> > The MaxStream radios do work fine as 802.15.4 radios. I'm using a lot
> > of them and ignoring the ZigBee mess.
> >
> >
>
> OK, please enlighten me... I was under the impression that zigbee and
> 802.15.4 were the same.
>
> Is zigbee just a protocol?
>
> What functionality do I get with just the radio part?
>
> In particular, I am looking for a mesh and relay type of self-healing
> network.
>
> --Yan
>
>
>
>
--
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|