The MaxStream radios do work fine as
802.15.4 radios. I’m using a lot of them and ignoring the ZigBee mess.
Enjoy,
Bill Landolina
From: [mailto:] On Behalf Of Don W. Carr
Sent: Tuesday, October 31, 2006
1:29 PM
To:
Subject: Re: [ts-7000] Re: IEEE
802.15.4/zigbee
I talked to the people at
Maxstream today, and they admitted right away that products are not
interchangeable from different vendors right now, not their standard zigbee
transmitter, nor the pro model.
So, anybody wanting to be an early adoptor, should plan on buying from a single
vendor for right now.
Don.
On 10/30/06, Jesse
Off <>
wrote:
We've already built this exact PC104 board. We've been
sitting on
it for almost 3 months already (temporarily distracted by some other
projects). We should have our first production run in later this
week. We'll be updating our website with the exact features shortly.
The board we've built accepts either the AeroComm 900Mhz radio
modems or the Maxstream zigbee ones. We're also building a TS-7400
based carrier board that includes identical functionality. It
basically just shows up as a serial port to Linux (/dev/ttyTS*).
//Jesse Off
--- In ts-7000%40yahoogroups.com,
"Don W. Carr" <> wrote:
>
> Ok, I am still doing research, I am planning on using a chip
with a
> serial interface, and puting it on a daughter board above a
7400.
It
> would be nice to have a solution supported by TS, but I know
they
> aren't super human and can't do everything.
>
> One option is: Maxstream XBee ZigBee OEM RF Module, which
appears
to
> be $19 in single unit quantities:
>
> http://www.maxstream.net/products/xbee/xbee-oem-rf-module-
zigbee.php
>
> Don.
>
> On 10/30/06, Yan
Seiner <> wrote:
> >
> >
> >
> >
> >
> >
> > --- In ts-7000%40yahoogroups.com, Pat Farrell <pfarrell@>
wrote:
> > >
> > > Don W. Carr wrote:
> > > > Is anybody using the TS Arm boards with IEEE
802.15.4/zigbee? Any
> > > > recomendations for hardware to interface to
this from the
ARM boards?
> > > > I am thinking on a design using the TS-7400
with a daughter
board.
> > >
> > > We will be soon. I've bought a 7250 to work with
short term,
the 7400
> > > looks idea.
> > >
> > > I've tried to talk Bob into doing the design for a
promise of
my buying
> > > a ton of boards, maybe we can gang up on him :-)
> > >
> >
> > We're also interested... We have some constraints but
wireless
looks
> > like it will work for a wire-replacement system, if we
can get
it
> > reliable enough for control systems (not life and
safety).
Heck, if
> > the price of copper keeps going up, you won't be able
to afford
wiring
> > much anymore... :-)
> >
> > zigbee looks like a good alternative to wifi for our
purposes.
> >
> > --Yan
> >
> >
>
>
>
> --
> Dr. Don W. Carr
> J. G. Montenegro 2258
> Guadalajara,
Mexico
> +52-333-630-0704
> +52-333-836-4500 ext 2930
>
--
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930
__._,_.___
![]()
SPONSORED LINKS
__,_._,___
|
|