Re: [ts-7000] Info :)

["Don W. Carr" <>]

The 7260 is low power (1 watt), but only has two AI on board, but 29
DIO available if you don't use the keyboard or lcd. There are others
that have 5 AI on board, but need more power. You probably do not want
the 7300 since it is a fair ammount bigger than the others. If you
needed even more dio, there is a 64 dio card in the works I heard, that
stacks on the PC/104 connector. There is also an 8 input AI card
available. I would recommend the USB wireless 802.11b/g interface so
you can to high bandwidth communcation without wires. Remember, these
are raw boards and you will have to do the signal conditioning. The AIs
for instance are 0-3.5 V.

Let us know if you need the code for opening the serial ports and setting the baud rate, etc. 

Don.

On 5/9/06, myzhar_arm <> wrote:

Hi all,
I'm new in the group.

I'm considering to buy an embedded ARM board for a robot application.
The board would coordinate al Robot hardware (Microchip PIC with RS232
support) and use Webcam images to make a kind of localization.

Which kind of board do you subjest me?

Thank you in advance

Walter

---------------------
- www.robot-home.it -
---------------------

SPONSORED LINKS

Linux os	Hardware	Arms
Computer internet	Computer security	Computer hardware security

---

YAHOO! GROUPS LINKS

•  Visit your group "ts-7000" on the web.
   
•  To unsubscribe from this group, send an email to:
   =Unsubscribe
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---

-- 
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930

SPONSORED LINKS

Linux os	Hardware	Arms
Computer internet	Computer security	Computer hardware security

---

YAHOO! GROUPS LINKS

•  Visit your group "ts-7000" on the web.
   
•  To unsubscribe from this group, send an email to:
   =Unsubscribe
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---