That was the problem -> need to set "flow
control" = none located under:
file -> properties -> "connect to" tab -> configure...
Thanks Eddie.
-Dave
--- Eddie Dawydiuk <> wrote:
> > I use a 7250 board, and experienced the same
> behavior. I stopped
> > using HyperTerminal, and instead use PROCOMM in
> VT100 emulation mode.
> > It works fine now. I never investigated why
> HyperTerminal was doesn't
> > work properly.
>
> Make sure you have hardware and software flow
> control turned off.
>
> //Eddie
>
> > --- In David Huffman
> <> wrote:
> >>
> >> Hello:
> >>
> >> I recently purchased a TS7000 board from
> Technologic
> >> Systems. Last night I hooked up the null modem
> >> RS-232 cable and watched it boot using the
> HyperTerm
> >> terminal emulator. Once it got to the login
> prompt
> >> I was unable to type the word "root" (or any
> other
> >> word for that matter) from the keyboard. The data
> >> from the keyboard does not appear to get sent to
> >> the SBC. Can anyone help me out here?
> >>
> >> Thanks,
> >> -Dave
> >>
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|