> ...watched it boot using the HyperTerm
> terminal emulator. Once it got to the login prompt
> I was unable to type the word "root" (or any other
> word for that matter) from the keyboard. The data
> from the keyboard does not appear to get sent to
> the SBC. Can anyone help me out here?
I use HyperTerm with my 7250 all the time. Since you can watch the boot
process, the baud rate is correct. If you connect HyperTerm to another
PC, can the two communicate?
What happens when you type 'root' on the keyboard and press Enter? I'm
thinking maybe the local echo is turned off, and you just aren't seeing
the characters you're typing. Try typing "root" AND pressing ENTER, to
see if you get a response. (But you've probably done this already.)
Mike
--
Mike Dodd - Montpelier, VA
http://www.mdodd.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|