[ts-7000] Re: processor clk control, cpld programming

["Jesse Off" <>]

All the pictures of our boards on our website are of prototype units
that were hand built before we had full production set up (including
the TS-7300 at http://www.embeddedarm.com/images/7300stcllw.jpg).  Our
technician  down here is legendary in our
office for his skill with a soldering iron.  If you mention that you
need some jumper wires soldered to the EP9302 JTAG pins when you order
the board, I'm sure we could rework the board for a small fee.

//Jesse Off

> There is a posting in this news group where a skilled engineer
brought out the 
> JTAG by soldering directly the the EP9302 pins on the controller.
(It seems 
> pretty incredible this guy managed to solder these, seeing as the
pins are 
> only ~0.20mm wide and ~0.30mm apart). 
> 
> 
> -Curtis.







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/