| Subject: | Settings on Olympus LS-12 with AT2022 to minimize noise |
|---|---|
| From: | "Thomas Bancroft" thomas_bancroft |
| Date: | Mon Apr 20, 2015 9:49 am ((PDT)) |
Hi, =C2=A0I have an Olympus LS-12 and a audio-technica AT2022 mic with a FE= L 3.5 microphone preamp attached to it. =C2=A0I am interested in taping the= morning chorus of birds with this setup and am getting quite a bit of nois= e in it. I was wondering if people had suggestions on the best settings on = the LS-12 that would minimize the noise level in the recordings. =C2=A0I us= ed it yesterday with the gain on the recorder set to "hi" and the level set= to 40. Would it be better to set the gain to "mid"?thanks for the help.tom |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Setting on Olympus LS-12 with AT2022 microphone, thomas_bancroft |
|---|---|
| Next by Date: | Re: Settings on Olympus LS-12 with AT2022 to minimize noise, nrdavies . jim71 |
| Previous by Thread: | Setting on Olympus LS-12 with AT2022 microphone, thomas_bancroft |
| Next by Thread: | Re: Settings on Olympus LS-12 with AT2022 to minimize noise, nrdavies . jim71 |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU