With regard to the linking issue, if the inputs are linked, gain knob 1
controls gain for both inputs and knob 2 controls balance. If the inputs are
unlinked, as I have them, then each gain knob only controls its respective
input. There isn't any way to assign both gain knobs to a single input
unfortunately. Thanks again everyone.
Bruce Rideout
"While a picture is worth a thousand words, a
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause.
------------------------------------------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/naturerecordists/
<*> Your email settings:
Digest Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/naturerecordists/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/
------------------------------------------------------------------------
|