naturerecordists
[Top] [All Lists]

Re: Cleaning and preventing fly sounds in recordings

Subject: Re: Cleaning and preventing fly sounds in recordings
From: "Peter Shute" pshute2
Date: Wed Mar 6, 2013 6:46 pm ((PST))
Doesn't it flap in the wind?

Peter Shute

> -----Original Message-----
> From: 
>  On Behalf Of Eric Fassbender
> Sent: Thursday, 7 March 2013 1:40 PM
> To: 
> Subject: [Nature Recordists] Re: Cleaning and preventing fly
> sounds in recordings
>
>
>
> Hi,
>
> I just felt that I owed all of you a response to your
> suggestions in regards to preventing flies in recordings. So
> here it is, even if belated :)
>
> My current solution:
>
> On Facebook
>
> https://www.facebook.com/photo.php?fbid=3D504319572951789&set=3Dpb
> .147092948674455.-2207520000.1362622723&type=3D3&theater
>
> On website
>
> http://www.australian-nature-sounds.com/pictures/P1010182.JPG
>
> But as you may see this is only a solution when I'm
> travelling to the location by car. For remote locations I
> have another solution ...
> As you can see in the picture, I also carry a small umbrella
> with me (on the ground). This is mostly to protect my gear
> and myself from unexpected rain or provide shade, however,
> the Rode NT5's are very sensitive to wind, even with a blimp
> and windjammer fur. So the umbrella occasionally doubles as
> an extra windshield in very strong wind conditions. Yes, the
> sound quality is reduced, however, in high wind situations
> this minimal reduction in quality does not bother me that
> much. The sound of the wind in the trees is definitely loud
> enough to make up for some other effects.
>
> However, apart from using the small umbrella for rain and
> wind protection, I also use it for fly protection now. I have
> purchased the cheapest and lightest mozzie net on eBay (so it
> adds absolutely minimal weight and bulk to my pack and if it
> rips I won't be stressed) and I hang this over the umbrella
> which I then hold over the microphones. That keeps the flies
> away far enough so their sound is reduced so it is almost
> inaudible :) In a high wind situation I just weigh the net
> down with rocks or branches. Good training for the hand and
> shoulder muscles, too ;)
>
> Thanks again for your input :)
>
> Eric
>
> On 29/01/2013, at 12:48 AM, 
> <naturerecordists%40yahoogroups.com>  wrote:
>
> > E-Mail group of individuals interested i Group
> > 5 New MessagesDigest #5689
> > 1aRe: Using Phantom Power with Sennheiser K6 Module by
> "Gianni Pavan"
> > gpavan1960 2aminidiscs? by "Debbi B." dgbrusco
> > 2bRe: minidiscs? by "jtudor2005" jtudor2005
> > 3aRe: Blimp wind cover for ME66 by "vickipowys" vpowys
> > 4aRe: Cleaning and preventing fly sounds in recordings by
> "vickipowys"
> > vpowys
> >
> > Messages
> > 1aRe: Using Phantom Power with Sennheiser K6 Module Sun Jan
> 27, 2013
> > 8:33 am (PST) . Posted by:"Gianni Pavan" gpavan1960in my experience
> > the K6/ME66 combination is noisier when operated on batteries,
> > moreover, they produce narrow peak above 25 kHz (variable
> in different
> > units). see the plots at the end of web page
> > http://www.unipv.it/cibra/res_techtest_uk.html
> > My K6 units have been serviced by sennheiser but the peaks did not
> > disappear.
> >
> > Gianni
> >
> > 2013/1/27 Jerry Berrier 
> > <jerry.berrier%40comcast.net> >
> >
> > > **
> > >
> > >
> > > Does it matter whether I use the built-in battery on the K6 or
> > > 48-volt power from my recorder?
> > >
> > > Jerry Berrier
> > >
> > > 508-735-4420
> > >
> > >
> > >
> > >
> >
> > --
> > Centro Interdisciplinare di Bioacustica e Ricerche Ambientali
> > Universit=E0 degli Studi di Pavia Via Taramelli 24, 27100 Pavia
> > http://www.unipv.it/cibra http://mammiferimarini.unipv.it
> >
> >
> > Reply to sender . Reply to group . Reply via Web Post . All
> Messages
> > (5) . Top ^ 2aminidiscs?
> > Sun Jan 27, 2013 1:03 pm (PST) . Posted by:"Debbi B."
> dgbruscoI have a couple of recorders and mic that I haven't
> used in a long time.
> > Does anyone still use minidiscs(i.e. would it be worth
> trying to sell
> > them?)?
> >
> > Sony MZ-R50
> > Sony MZ-NH1
> > Sony ECM-MS957
> >
> > And if anyone is interested in these, please let me know.
> >
> > Thanks.
> >
> > Debbi
> >
> >
> > Reply to sender . Reply to group . Reply via Web Post . All
> Messages
> > (2) . Top ^
> > 2bRe: minidiscs?
> > Sun Jan 27, 2013 1:25 pm (PST) . Posted by:"jtudor2005"
> jtudor2005They are probably more useful for that time when
> you have a need to transfer something from mini-disc to
> another format.
> >
> > I often get requests for transfer from tape to CD and my
> old tape (but well maintained) recorders come into use.
> >
> > --- In 
> <naturerecordists%40yahoogroups.com> , "Debbi B." wrote:
> > >
> > > I have a couple of recorders and mic that I haven't used
> in a long time.
> > > Does anyone still use minidiscs(i.e. would it be worth trying to
> > > sell them?)?
> > >
> > > Sony MZ-R50
> > > Sony MZ-NH1
> > > Sony ECM-MS957
> > >
> > > And if anyone is interested in these, please let me know.
> > >
> > > Thanks.
> > >
> > > Debbi
> > >
> > >
> > >
> >
> > Reply to sender . Reply to group . Reply via Web Post . All
> Messages
> > (2) . Top ^
> > 3aRe: Blimp wind cover for ME66
> > Sun Jan 27, 2013 10:35 pm (PST) . Posted by:"vickipowys"
> vpowysPeter,
> >
> > My response may be too late but I'll send it anyway.
> >
> > I have an ME66 which I use in the field with a slip-on Rode
> Softie and
> > handle, very useful but it will catch some wind rumble. I make sure
> > the area of the on-off switch is also covered with furry
> fabric as it
> > is sensitive to wind, for some reason. You can use an
> ordinary comb to
> > brush the softie hair, you don't need a special brush. It
> is important
> > that the fur not be matted and that it should bend in the wind and
> > 'confuse' the wind rather than stop it dead.
> >
> > If I am looking to get a really good lyrebird recording
> with no hint
> > of wind rumble then I use a full Rode blimp with the ME66
> plus handle
> > on a monopod. The fact that the blimp completely covers the back of
> > the mic and the cable attachment, and is rounded at the
> front, are all
> > positives. I have the furry cover but never need to use it,
> instead I
> > have found that the mesh cover, plus a green furry mohair
> cover (good
> > cammo) are all that I need.
> >
> > Mostly I use the softie simply because it is quicker, lighter and
> > easier but the full blimp is fantastic for certain situations.
> >
> > Vicki
> >
> > On 22/01/2013, at 8:25 AM, Peter Shute wrote:
> >
> > > My experience with the foam and fur on the ME66 hasn't
> been good in
> > > stronger winds. After hearing so many comments to the
> contrary, I'm
> > > wondering if my problems are due to an inadequate furry
> cover. I'm
> > > not even sure what type it is, it came with the second
> hand ME66 I
> > > bought. I've always thought the fur seemed too short, so perhaps
> > > just replacing the cover would have done the job.
> > >
> > > However, unfortunately the blim is now ordered, so I'll
> get to see
> > > what it can do. I had been thinking of the possibility of
> an NT4 in
> > > the future, so it won't go to waste.
> > >
> > > Or, thinking of having tolug it around, maybe I should
> exchange it.
> > > What's the best model of furry cover that will go over the foam?
> > >
> > > Peter Shute
> > >
> >
> >
> > Reply to sender . Reply to group . Reply via Web Post . All
> Messages
> > (22) . Top ^
> > 4aRe: Cleaning and preventing fly sounds in recordings Sun Jan 27,
> > 2013 10:47 pm (PST) . Posted by:"vickipowys" vpowysHi Eric,
> >
> > Flies that land on your mics are pretty much impossible to
> remove with
> > audio editing altho you can modify them a little with
> something like
> > RX.
> >
> > I agree with Dan, the best bet are those folding clothes
> hampers made
> > with fine mesh which would stop the flies actually landing on the
> > mics. That way you will hear the flies as part of the
> environment but
> > without the intrusion of 'landing in your ears'. Another
> thing I used
> > to try was a piece of lightweight cotton cloth, give that a light
> > spray with aerogard, then drape it over the mic rig, there would be
> > just enough scent to stop the flies landing on the rig but
> not enough
> > to damage any equipment.
> >
> > It's all very well for Andrew to say 'don't record in areas where
> > there are flies' but one of the most beautiful locations I
> came across
> > in Kakadu for recording Little Shrike-thrush was laden with large
> > stripey purple flies, obviously the birds liked to eat
> them. I rested
> > the mic rig on a log and gently waved a leafy branch back
> and forth to
> > stop the flies landing, whilst dreaming up a foolproof fly
> net for my
> > next visit!
> >
> > Just a few ideas,
> >
> > Vicki
> >
> > On 21/01/2013, at 10:54 AM, Eric Fassbender wrote:
> >
> > > Hi all and thanks for welcoming me to the community.
> > >
> > > I currently live in Darwin, Australia so most of my recordings
> > > feature sounds from the tropical north. If you are
> interested, feel
> > > free to have a listen on my website or on Soundcloud
> (details below).
> > >
> > > One problem that I often face are flies that mess up my
> recordings
> > > (being in Australia's outback, flies are a very common
> occurrence).
> > > Does anyone have suggestions on a) how to remove the
> nasty buzzing
> > > sounds from existing recordings or (and this would be even more
> > > helpful) b) how to prevent flies in recordings in the first place?
> > >
> > > In regards to a) my current approach is to just chop the
> bits where
> > > the flies are too dominant but in some recordings that
> means that I
> > > not only lose 70% of the recording but it is also a whole heap of
> > > work where the 3 minute outcome does not justify the 6 hours of
> > > editing. The problem is that the buzzing sound goes right
> across the
> > > frequency spectrum from about 300 Hz to about 3KHz. It would be
> > > great if someone had a suggestion on how I can remove or
> mask this
> > > annoyance.
> > >
> > > In regards to b) I've been thinking about all sorts of
> > > constructions, like mozzie nets that can be installed around the
> > > microphones or some sort of repellent to keep the flies away,
> > > however, the problem with mozzie nets is that the
> additional weight
> > > and stuff that I have to carry and the time it takes to set
> > > everything up does again not seem to justify the result. And
> > > apparently there is no fly repellent that really works,
> so that just
> > > seems to be pouring money down the drain for something
> that is very
> > > likely to not work. Plus, I wouldn't want to spray any
> chemical on
> > > the windjammers anyway.
> > >
> > > My recording gear includes a Marantz PMD661 with a pair
> of matched
> > > Rode NT5's. The NT5's are very sensitive and not normally
> the best
> > > choice for even slightly windy situations, however, when combined
> > > with a blimp and windjammer they create a brilliant and authentic
> > > stereo image of the locations. I am very happy with this
> setup as it
> > > is very compact and the quality of the recordings is very
> good too.
> > > It's just the bloody flies that I need to get rid off. So
> if anyone
> > > has some recommendations or tricks on how to remove flies from
> > > existing recordings without compromising too much of the actual
> > > desired sounds or on how to prevent flies from entering the
> > > recording space in the first place, that would be much
> appreciated.
> > >
> > > I look forward to hearing from you,
> > >
> > > Eric
> > >
> > >
> > > Website: www.australian-nature-sounds.com
> > > Soundcloud: https://soundcloud.com/australiannaturesounds
> > >
> >
> > Reply to sender . Reply to group . Reply via Web Post . All
> Messages
> > (11) . Top ^ Visit Your Group> View All Topics> Create New
> Topic> We
> > are making changes based on your feedback, Thank you
> !Submit Feedback>
> > The Yahoo! Groups Product BlogCheck it out!> GROUP FOOTER MESSAGE
> > "While a picture is worth a thousand words, a sound is worth a
> > thousand pictures." R. Murray Schafer via Bernie Krause.
> >
> > CHANGE SETTINGS>TERMS OF USE>UNSUBSCRIBE>
>
>
>
>
>
>






<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU