naturerecordists
[Top] [All Lists]

1. Re: iRig pre

Subject: 1. Re: iRig pre
From: "" m_pesente
Date: Sat Dec 29, 2012 4:49 pm ((PST))

Finally, after about 50 days, I received the cable to right connect the IRig 
Pre to one of my digital recorders!
At a first look, using an AT3032 + IRigPre 48V Ph to Line IN, it seems the 
recorded signal is much  more high with Roland R05 than Olympus Ls5.
I'll perform a practical test as soon as possible, also considering the Sony 
M10.

Marco Pesente 




--- In  "Max" <> wrote:
>
> Hi Marco!
> Many thanks for your good wishes; it's appreciated.
> I am amazed that you still haven't received your cable! Did you contact the 
> seller, or is the Italian Postal Service really that bad?!
> All the best for now
> Max








<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU