1. Re: R-44 issue
Date: Thu Jun 21, 2012 7:49 pm ((PDT))
> I connected sets of DPA4060 mics & when testing with these there is an au=
dible fluttering in low frequencies when connected to the R-44. Also some k=
ind of electronic signal generated by the recorder is audible.
According to my notes the DPA 4060 functions best at 48 =B14V but can run o=
n as low as 10V and draws around 0.5 mA. I would assume the recorder can at=
least provide that much times two. So if the recorder has the same symptom=
s with only two mics connected we need to look elsewhere for the culprit.
I would not be surprised if it was some strange grounding issue, perhaps re=
lated to how the shield of the socket and cable converter make (or fail to =
make) contact. I am hardly an expert but recall reading something similar s=
ome years back, relating to the DAD6001BC.
-- Robin Parmar
The University of NSW School of Computer and Engineering
takes no responsibility for the contents of this archive. It is purely
a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way.
If you wish to get material removed from the archive or
have other queries about the archive e-mail
Andrew Taylor at this address: