[Top] [All Lists]

Re: parabolic mics + recorder noise

Subject: Re: parabolic mics + recorder noise
From: "Raimund" animalsounds
Date: Fri Jun 10, 2011 8:17 am ((PDT))
> What would be a good workflow to check this on a Sony PCM-M10?  Or has so=
meone already performed this test?

Hi Lesli,

According to my measurements on the Sony PCM-M10, the setting LOW and 10 pr=
ovides the same dBFS level as the setting HIGH and 4.5.

Fortunately, there is no significant difference between the absolute noise =
floors of these two settings (-117dBu vs -118dBu), which is a plus for the =


<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU