naturerecordists
[Top] [All Lists]

Re: Advice/Opinions on stereo mic cable

Subject: Re: Advice/Opinions on stereo mic cable
From: "dvd_hoover" dvd_hoover
Date: Fri May 7, 2010 2:35 pm ((PDT))

--- In  Scott Fraser <> wr=
ote:
>
> << Now to source the copper tape for shielding.>>
>
> The shield is part of the cable. It's the foil or woven braid around
> the inner conductors. You don't have to add anything.

Thanks for the reply.

I was just referring to shielding the splice (mid-cable) on breakout cables=
.
I'd like the actual split to be near the recorder end with just the single =
(stereo) cable from mic to splice, similar to one of Mike Wall's here:

http://groups.yahoo.com/group/naturerecordists/photos/album/1787922537/pic/=
1667732643/view?picmode=3D&mode=3Dtn&order=3Dordinal&start=3D1&count=3D20&d=
ir=3Dasc










<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU