naturerecordists
[Top] [All Lists]

Re: SPL Problems with AT3032's?

Subject: Re: SPL Problems with AT3032's?
From: "Paul Jacobson" thebrunswicktwitcher
Date: Tue Mar 16, 2010 1:20 pm ((PDT))
On 17/03/2010, at 1:14 AM, JLMoore3 wrote:

> Thanks for the replies... I had the Wendt set to -10dB, and it sounds
> like I should have set it to -20dB. I did have the limiter on. It's good
> to know the signal flow on the X3.

Hi John,

Have you done any nature sound recording with the X3?  I'm in the market fo=
r a preamp to run in front of my AT3032/HDP2  so I'd be very interested in =
hearing how the Wendt performs in quiet conditions if you have the chance r=
ecord with the 3032's attached.

cheers
Paul





<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU