| Subject: | Re: Cable adapter question - answer |
|---|---|
| From: | "John Hartog" hartogj |
| Date: | Thu Apr 9, 2009 7:59 pm ((PDT)) |
Thank you Mike!! I should have thought to ask on the SD forum. So the answer is: sleeve of the unbalanced, to the cable shield, to both pins 1 & 3 of the balanced. Tip and Ring to L and R pin 2. John Hartog --- In Michael Oates <> wrote: > > John, > > I asked the question on the Sound Devices forum because I am about to do the > same but with > a 744T recorder, and the answer is: > > "You'll ground pin-3 (connect it to pin-1). This is identical to the > tranformerless inputs > on all 7-Series recorders." This is from Sound Devices support. > > Regards, > > Mike |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Cable adapter question - answer, Michael Oates |
|---|---|
| Next by Date: | Filtering out jet planes on a Mac (was flight path maps), vickipowys |
| Previous by Thread: | Re: Cable adapter question - answer, Michael Oates |
| Next by Thread: | Re: Cable adapter question - answer, Scott Fraser |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU