naturerecordists
[Top] [All Lists]

Re: Cable adapter question - answer

Subject: Re: Cable adapter question - answer
From: "John Hartog" hartogj
Date: Wed Apr 8, 2009 5:10 pm ((PDT))
I think one of those might be for a balanced mono input source only - I hav=
e an unbalanced source. The SD702 manual states the xlr jacks "accept balan=
ced or unbalanced mic- or line-level inputs", but does not explain wiring e=
xcept that: 1-ground, 2-signal(+), 3-signal(-).

John Hartog

> Since this is for the SD702. On mine I use an XLR to 1/4 inch adaptor. I'=
m not sure of the brand as it's not marked. But they look like this
>
> http://store.a2zcable.com/ava125.html
>
> John
>








<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU