Rally,
To go with John's explanation, have a look at this picture:
http://www.pterodaktyl.co.uk/wp-content/uploads/2009/02/2009-02-20-ortf-arr=
ay-004.jpg
The gold dot on the microphone barrel, just visible above the middle cable
tie, indicates the axis of the transducer. It took me a while to figure thi=
s
out when first looking at setups using this mic - further complicated by th=
e
fact that some people have actually modded their NT1-As into a front-addres=
s
mic before building them into an array!
Regards,
Tom W.
2009/2/23 ozrall <>
> Tom,
>
> I would be keen to try this setup, but on looking at your photos and
> reading your test I am confused.
>
> You say the mics are spaced 17cm apart and at an angle 110=B0
> I couldn't make out the angle in yours - they appeared to be mounted
> parallel to one another ?
> Obviously I am missing something obvious here !
>
> I would be grateful if someone could point me to a link that sows or
> explains this or a more detailed description as to the mic orientation.
>
> Many Thanks to the list
>
> Rally
>
>
>
|