| Subject: | Re: Custom shockmount/windshield for RODE NT1-As |
|---|---|
| From: | "ozrall" ozrall |
| Date: | Mon Feb 23, 2009 2:16 pm ((PST)) |
Tom, I would be keen to try this setup, but on looking at your photos and reading your test I am confused. You say the mics are spaced 17cm apart and at an angle 110=B0 I couldn't make out the angle in yours - they appeared to be mounted parallel to one another ? Obviously I am missing something obvious here ! I would be grateful if someone could point me to a link that sows or explains this or a more detailed description as to the mic orientation. Many Thanks to the list Rally |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Custom shockmount/windshield for RODE NT1-As, John Hartog |
|---|---|
| Next by Date: | Re: Custom shockmount/windshield for RODE NT1-As, John Hartog |
| Previous by Thread: | Re: Custom shockmount/windshield for RODE NT1-As, John Hartog |
| Next by Thread: | Re: Custom shockmount/windshield for RODE NT1-As, John Hartog |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU