You can take advantage of the good mic pre in the FR2-LE by using two
of these adapters specifically for the wl183's (with connector):
http://www.shure.com/ProAudio/Products/Accessories/us_pro_MX1BP_content
or possibly Naiant's PFA Phantom Adaptor for Stereo Plug-in Power
Microphone-- http://naiant.com/studiostore/cleverdevices.html -- but
no one has reported back about the performance of this unit yet as
far as I recall and you'd have to solder on a 3.5mm stereo plug on
your wl-183's.
Rob D.
=3D =3D =3D =3D
At 9:55 PM +0000 8/26/08, Danny Meltzer wrote:
>--- In
><naturerecordists%40yahoogroups.com>=
m,
>"digidandy" <> wrote:
>>
>> Anyone got any suggestions?
>>
>> I've still got the TA4F-connectors at the end of the cables.
>>
>
>you're going to need some intermediate device for powering the mics.
>they cannot run off
>phantom power. the way i have my 183s rigged to go into my 744 is
>this: the mics are wired
>together into a stereo mini plug. that goes into one of these:
>
><http://www.soundprofessionals.com/cgi-bin/gold/item/SP-PREAMP>http://www.=
soundprofessionals.com/cgi-bin/gold/item/SP-PREAMP
>
>and then that has a mini-stereo XLR cable coming out to go into the 744.
>
>There are other ways to do it, but you will need some sort of device
>to send the proper power
>to the mics. They need 'plug-in power' which is basically a consumer
>version of phantom
>power for mics that use mini connections.
>
>Danny
>
>
--
|