Re: WL183 into FR2-LE - how can it be done?

naturerecordists

Re: WL183 into FR2-LE - how can it be done?

Subject:	Re: WL183 into FR2-LE - how can it be done?
From:	"Dan Dugan" dandugan_1999
Date:	Tue Aug 26, 2008 4:24 pm ((PDT))

> I've still got the TA4F-connectors at the end of the cables.

That's the way I keep all my PIP mics. I make Y-adaptors to 3.5mm  
stereo for use on PIP recorders.

Shure makes a power supply barrel RK183PK (about $100) that adapts the  
183s to phantom power very nicely.

-Dan Dugan

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
WL183 into FR2-LE - how can it be done?, digidandy Re: WL183 into FR2-LE - how can it be done?, Danny Meltzer Re: WL183 into FR2-LE - how can it be done?, Dan Dugan <= Re: WL183 into FR2-LE - how can it be done?, Kim Cascone Re: WL183 into FR2-LE - how can it be done?, digidandy Re: WL183 into FR2-LE - how can it be done?, Lou Judson Re: WL183 into FR2-LE - how can it be done?, Dan Dugan Re: WL183 into FR2-LE - how can it be done?, Rob Danielson Re: WL183 into FR2-LE - how can it be done?, digidandy

Previous by Date:	Re: WL183 into FR2-LE - how can it be done?, Danny Meltzer
Next by Date:	Re: mic boxes, escalation746
Previous by Thread:	Re: WL183 into FR2-LE - how can it be done?, Danny Meltzer
Next by Thread:	Re: WL183 into FR2-LE - how can it be done?, Kim Cascone
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU