| Subject: | Re: WL183 into FR2-LE - how can it be done? |
|---|---|
| From: | "Danny Meltzer" dannymeltzer |
| Date: | Tue Aug 26, 2008 2:55 pm ((PDT)) |
--- In "digidandy" <> wrote: > > Anyone got any suggestions? > > I've still got the TA4F-connectors at the end of the cables. > you're going to need some intermediate device for powering the mics. they cannot run off phantom power. the way i have my 183s rigged to go into my 744 is this: the mics are wired together into a stereo mini plug. that goes into one of these: http://www.soundprofessionals.com/cgi-bin/gold/item/SP-PREAMP and then that has a mini-stereo XLR cable coming out to go into the 744. There are other ways to do it, but you will need some sort of device to send the proper power to the mics. They need 'plug-in power' which is basically a consumer version of phantom power for mics that use mini connections. Danny |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | WL183 into FR2-LE - how can it be done?, digidandy |
|---|---|
| Next by Date: | Re: WL183 into FR2-LE - how can it be done?, Dan Dugan |
| Previous by Thread: | WL183 into FR2-LE - how can it be done?, digidandy |
| Next by Thread: | Re: WL183 into FR2-LE - how can it be done?, Dan Dugan |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU