there was a great thread on the TS site on how to make a cheap grip:
http://tinyurl.com/56t2lf
and specific DIY examples here:
<http://taperssection.com/index.php/topic,
Message: 106439.
Subject: msg1445270.html#msg1445270>
<http://taperssection.com/index.php/topic,
Message: 106439.
Subject: msg1421494.html#msg1421494>
chevrons should keep the urls from breaking
next get a stereo T-bar that has the spacing you are interested in
here's an example -- but the spacing is too small for another other
than XY:
<http://www.wesdooley.com/aea/Microphone_Array_Positioners.html>
or you can make one that accommodates 20, 30 or 40cm spacings
but then the longer lengths become somewhat unwieldy in a pistol grip
setup
as for windshields:
individual ball gags (one for each 3032) would work better than
trying to fit both into a zeppelin
but not sure where to get cheaper versions of these -- or maybe there
is a DIY
or maybe a couple of those slip-on softies
http://www.koalawindsocks.com
anyway, a hand held rig for 2x 3032's shouldn't break the bank
and the Rycote mafia should be sued for monopoly! ;)
|