| Subject: | Re: Shure WL183 jack wiring |
|---|---|
| From: | "Rob Danielson" danielson_rob |
| Date: | Sun Dec 9, 2007 8:31 am ((PST)) |
At 6:00 AM +0000 12/9/07, John Hartog wrote: >Alternative to cutting the cables, there is also the method of making >an adapter cable that connects to the existing connectors on the >wl-183s. This was described in an earlier diagram of Rob's, and I >think it is still up somewhere on his site. http://www.uwm.edu/~type/audio-reports/Shure-WL183s/images/shure183p-i-pAdaptercable.jpg Rob D. -- |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Experience with BT-BI158's?, Steve Cox |
|---|---|
| Next by Date: | Re: Shure WL183 jack wiring, Walter Knapp |
| Previous by Thread: | Re: Shure WL183 jack wiring, John Hartog |
| Next by Thread: | Re: Shure WL183 jack wiring, Walter Knapp |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU
