naturerecordists
[Top] [All Lists]

Re: AT3032 and instability in Sound Devices MixPre and 302, 442, MM-

Subject: Re: AT3032 and instability in Sound Devices MixPre and 302, 442, MM-
From: "Philip Tyler" macmang4125
Date: Fri Nov 30, 2007 1:37 am ((PST))
Thanks Paul

Phil


----- Original Message ----
From: Paul Jacobson <>
To: 
Sent: Friday, 30 November, 2007 9:12:14 AM
Subject: Re: [Nature Recordists] AT3032 and instability in Sound Devices MixPre 
and 302, 442, MM-1, M

Hi Phil,

According to the mix-pre user guide:

> Power (External):
> 5 - 18 VDC via 4-pin Hirose connector (pin-4 positive, pin-1 
> negative), voltages above 14 VDC cause no damage to unit, but will 
> open an internal poly fuse. Poly fuse will reset when voltage is 
> removed.

So you should be able to connect directly from the battery to the mix- 
pre using a Hirose connector at the mix-pre end of the cable.

cheers
Paul

On 30/11/2007, at 7:48 PM, Philip Tyler wrote:

> Hi Paul
>
> Not having ever run my MixPre from an external battery before would 
> I need to use a fuse in the supply from the battery, or can you 
> just plug it in?
>
> Phil
>




      ___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/ 






<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU